Meter Reading

STEP 1  Locate your meter box, generally found towards the front of a property, near the street. The box is typically in a direct line with the main outside faucet. It is housed in a concrete box usually marked "water". Remove the lid by using a tool such as a large screwdriver. Insert the tool into one of the holes and pry the lid off.

STEP 1  Locate your meter box, generally found towards the front of a property, near the street. The box is typically in a direct line with the main outside faucet. It is housed in a concrete box usually marked "water". Remove the lid by using a tool such as a large screwdriver. Insert the tool into one of the holes and pry the lid off. STEP 2  Once you open the meter box lid, lift the protective cap on the meter. On the face of the meter, there is a large dial and a display of numbers. For the residential meter, each rotation of the dial measures 10 gallons. Read the number display from left to right. Be sure to include the stationary zero. This is your meter reading. Meters measure water in gallons or cubic feet. Charges for the amount of water consumed are rounded to the nearest thousand gallons or hundred cubic feet used during a billing period. Compare that reading to what your bill states as your current or present reading. STEP 3  Keep in mind that you might be checking your meter on a date different from the one used for billing. This could result in a difference in the amount you find, compared with the amount on which your bill is based. However, if your reading is considerably higher than what is on your bill, check for a leak or try to determine the source of large water use. If your reading is significantly lower than the reading on your bill, please contact us and let us assist you in determining the problem. Our Meters Bill Payment Water Quality Report Alerts FDOT Meeting Alert August 17, 2026 Sign Up for Alerts Unsubscribe Calendar Local Weather Today Tomorrow Monday Thunderstorm with rain 88°/73° Scattered clouds 91°/73° Few clouds 94°/74° Alert Alerts FDOT Meeting Alert August 17, 2026 Molino Utilities is inviting our customers to attend a meeting with FDOT about the design project for the Highway 196 and Highway 29 intersection. The meeting will be held on Sept 15, 2026 from 5:30 PM to 6:30 PM at Victory Assembly of God at 1895 Victory Rd Cantonment, Fl 32533. There will be 2 design option presented at the meeting. If you have any questions, please feel free to contact our office. Ok, Got It! Alerts FDOT Meeting Alert August 17, 2026 Molino Utilities is inviting our customers to attend a meeting with FDOT about the design project for the Highway 196 and Highway 29 intersection. The meeting will be held on Sept 15, 2026 from 5:30 PM to 6:30 PM at Victory Assembly of God at 1895 Victory Rd Cantonment, Fl 32533. There will be 2 design option presented at the meeting. If you have any questions, please feel free to contact our office. Close